Site Map
  Home Page Index of Materials and Products Contact Us

or call 603 671 7016

About Your Colored Fabrics/Sleeves

Our (patent pending) coloring procedures are the result of years of research.  All of our colorants are compatible with Epoxy, Polyester and Vinylester resins & hardeners.

All of our custom colored products are intended primarily for aesthetic (looks, not strength) applications.  Many of our colorants are slight electrically conductive and are therefore not intended for electrical applications or any other application where this conductivity is specifically not desired.  Our colorants have been successfully tested up to 150 degrees F.

Our coloring procedure is a custom process. Each colored sleeves/product (for non-Natural colors) is a custom product made specifically to your specification (color, specific fabric/sleeve type, and length).  For information regarding returns of custom colored sleeves/fabrics, please refer to the "Custom Made or Cut Products/Fabrics" section of our refund policy.

As with most coloring procedures, the actual color of the sleeve requested may vary very slightly between batches.  Please ask for samples if/as needed for your application. If you have any questions, we are more than happy to work with you. Please contact us if you would like more info.

We can and do color-match! Please send us at least a sample the size of 2"x2" so that we can match your color. For custom colored fabrics/sleeve orders under $500.00, there is a $15.00 color matching fee and a $25.00 minimum custom colored fabric and/or sleeve order requirement. We will keep your custom color on file for 1 year. If you want us to permanantly record your color(s), we ask for a $5.00 recording fee no matter how many custom colors we permanantly record for you.

Working with Your Colored Sleeves

With a little care you can create beautiful custom products with your colored sleeves!

Please note that our colored sleeves are normally a bit stiffer than our natural sleeves. Before applying resin to your sleeves, particularly if the sleeves have been sitting around for some time, you can easily soften them up by working them a bit or by gently pulling them over a blunt object (such as a table edge or a rounded tool handle).


Important Safety Information!

If you purchased Carbon Fiber, Fiberglass, Basalt, or colored fabrics from us, please understand that these products generate fiber dust. Use caution when combining with resins/hardeners to insure temperatures do not exceed the heat threshold. All of these products may irritate the skin, eyes, mucous membranes, or potentially damage your throat, lungs, other parts of your respiratory system, and may have other long term exposure health affects.

Never handle these products without proper safety equipment. Please use adequate ventilation in your work area and use a dust and organic vapor respirator, Nitrile gloves, and sealed goggles. Always wash thoroughly after working with these products. Carbon fiber, all colored fabrics/sleeving, and their dust do conduct electricity. Please keep these products and their dust always from contacting any outlets, plugs, and electrical devices. Do not eat, ingest, or place products in mouth. Do not incinerate these products.

If you don’t have the appropriate safety equipment for working with these products, please contact us, we will be happy to work with you.

If you would like more info, please contact us. If you don’t have access to the internet and/or you would like us to mail you this info, please contact us and we will be happy to do so.

Thank you,

Soller Composites, LLC

603 671 7016


Soller Composites, LLC assumes no responsibility for the use, misuse, and/or results of either, as related to any materials, product(s), information, and/or suggestions. Customers are strongly encouraged to, and should/must, research the proper safe use of such products and determine the suitability of each product for his or her individual application(s).

The buyer agrees not to use these products directly or indirectly for any military purpose (ex. missile development, chemical, nuclear, biological use), except those directly approved by the USA federal government. The buyer accepts full responsibility for, and is responsible for determining the prohibited use of all products.

Purchase of products from Soller Composites, LLC constitutes acceptance of these terms and any and all liability. Soller Composite, LLCs, its employees, owners, contractors, and partner(s) sole responsibility and/or liability are limited to the replacement of product or refund of purchase price.  Please contact us if you have any questions.